- Mon – Sun: 24/7 - even on holidays
From standard electric ranges to built-in gas wall ovens, TechVill technicians diagnose and repair all oven types. With over 4,800 gas and electric ovens restored across Canada and factory authorizations from GE, Electrolux, Bosch, and Samsung, our team resolves everything from igniter failures and thermostat malfunctions to complex control board replacements.
TechVill technicians are factory-authorized by GE, Electrolux, Bosch, and Samsung, and qualified to repair gas and electric ovens from all major brands sold in Canada. Select your oven brand below for model-specific repair details.
Call us or complete the online form with your oven brand, model, and the issue - no heat, gas smell, error code, uneven baking, or a door that won't seal. Our coordinator reviews your request, identifies the right technician by brand certification, and confirms your same-day or next-day appointment slot within minutes.
A factory-trained specialist asks targeted questions: fuel type, when the problem started, and whether any error codes appear. This pre-screening narrows the likely cause - faulty igniter, drifting thermostat, element failure, or control board issue - so the technician arrives prepared with the right tools and relevant OEM components.
While the technician prepares, our supply team cross-references your oven model against Reliable Parts and Marcone inventory. Igniters, thermocouples, heating elements, door gaskets, and temperature sensors are stocked on every service vehicle. Less common components arrive through direct manufacturer channels, typically within 2–4 hours.
Our coordinator assigns the best-fit technician based on brand certification, fuel-type experience, and proximity - confirmed in under 3 minutes. Built-in wall ovens and heavy dual-fuel ranges are handled by a two-person crew. Route planning and tool preparation are finalized before departure, keeping arrival times on schedule.
Your technician arrives fully insured, equipped with multimeters, pressure gauges, and model-specific service tools. On-site diagnosis takes 15–30 minutes; standard fixes - igniter replacements, element swaps, thermostat recalibrations - wrap up in 60–90 minutes. Gas oven repairs end with a post-repair leak check and combustion safety test.
After repair, we run a full heating cycle to verify accurate temperature output and safe operation. You receive written warranty documentation on the spot - 90 days on labor, up to 12 months on OEM parts. If any issue arises within the warranty period, a callback is scheduled within 24 hours at no additional charge.
– Gas Igniter Failure: Worn or cracked igniters fail to reach sufficient temperature to open the gas valve
– Electric Element Burnout: Bake or broil elements develop visible breaks or hotspots, preventing heat generation
– Thermal Fuse Tripped: Safety device cuts power after overheating events, requiring professional diagnosis
– Convection Fan Malfunction: Failed fan motor or broken blades disrupt hot air circulation throughout the cavity
– Calibration Drift: Temperature sensor reading inaccuracies cause the oven to run hotter or cooler than set
– Damaged Door Gasket: Worn seals allow heat to escape, creating inconsistent temperatures inside the oven
– Delayed Ignition: Gas accumulates before igniting, causing a loud pop – indicates worn igniter or valve issue
– Gas Valve Malfunction: Faulty safety valve fails to regulate gas flow properly, requiring immediate repair
– Thermocouple Failure: Safety sensor fails to detect flame, shutting off gas supply during normal operation
– Temperature Sensor Resistance Shift: Sensor provides incorrect readings to the control board, affecting cook times
– Control Board Failure: Electronic board miscalculates temperature data, causing heating cycle irregularities
– Heating Element Partial Failure: Element heats unevenly or at reduced output, failing to reach target temperature
– Door Lock Motor Failure: Motorized lock mechanism fails to engage, preventing the self-clean cycle from starting
– High-Limit Thermostat Issue: Safety thermostat prevents the oven from reaching cleaning temperatures
– Control Panel Error: Electronic controls fail to initiate the cleaning program due to software or hardware faults
– Broken Door Hinges: Mechanical wear causes the door to sag, not close flush, or stick during opening
– Shattered Inner Glass: Thermal stress or impact cracks the inner glass panel, requiring professional replacement
– Latch Assembly Failure: Door latch components wear out, preventing proper seal during cooking or self-clean cycles
When we complete an oven repair, you receive full written documentation – diagnosis summary, replaced components with serial numbers, and warranty activation confirmation. Labor is covered for 90 days; OEM parts carry up to 12 months of manufacturer protection. Should the same fault reappear within the warranty window, our callback team arranges a return visit within 24 hours at zero cost. Approved refunds are processed in 48 hours. A real estate client avoided a $3,500 wall oven replacement thanks to our timely repair during a property sale – that level of accountability is standard on every job.
Garrik Amirov launched TechVill in Calgary in 2018, bringing 14+ years of engineering discipline from Schlumberger and M-I SWACO to the appliance repair industry. Today the company operates across 5 provinces with a 25-technician team trained in-house on gas and electric oven systems. Every location is company-owned – no franchises – maintaining uniform quality: factory authorizations, OEM-only parts sourcing, weekly OHS safety meetings, and $5M liability coverage on every service call. Our partnership with Metal and Electronics Recycling ensures responsible disposal of decommissioned units, with 10-12 appliances recycled each month. BBB Accredited Business with A+ Rating.
We handle all common oven failures: won’t heat or preheat, uneven baking and cooking, gas igniter not lighting, inaccurate temperature readings, error codes displaying, self-clean function not working, door not closing properly, broiler not functioning, unusual gas smell, and control panel malfunctions. Our technicians diagnose the root cause – whether it’s a failed igniter, worn heating element, a faulty thermostat, or a damaged control board – and repair it using OEM components.
Diagnostic fee starts at $179 for standard ovens and $259 for premium brands (Wolf, Viking, Thermador, Miele), including 15 minutes of hands-on assessment. Standard labor rate is $170/hour for common ovens and $260/hour for high-end models. Gas oven system work starts at $250. We provide a complete cost breakdown – labor, parts, and warranty – before any repair begins.
Yes. Gas oven repair is a core service at TechVill. Our technicians follow strict safety protocols with weekly OHS briefings, use pressure gauges and combustion testing equipment, and verify safe gas operation before completing any repair. All gas oven work is covered by our $5M commercial liability insurance. If you smell gas, turn off the supply and contact us for priority same-day service.
Yes. We service all oven configurations including freestanding ranges, slide-in ranges, built-in single and double wall ovens, and combination microwave-oven units. Built-in wall ovens often require two-technician service due to weight and installation complexity – our team handles the full removal, repair, and reinstallation process.
We repair gas and electric ovens in Calgary and 20+ surrounding communities (Airdrie, Cochrane, Chestermere, Okotoks, Canmore, Banff), Vancouver metro (Burnaby, Richmond, Surrey, North Vancouver), Edmonton region (Leduc, Spruce Grove), Winnipeg area (Headingley, Selkirk), and Ottawa. Each location offers same-day scheduling for urgent oven failures.
Our service vehicles carry the most commonly replaced oven components – igniters, heating elements, thermocouples, and temperature sensors. For less common parts, our supply team orders through authorized manufacturer channels with typical delivery of 1-3 business days. The return visit for part installation is booked at your convenience and does not incur a second diagnostic fee.
Yes. Oven installation starts at $199 for standard models and $269 for high-end units (without a separate service call). For gas oven installation, our technicians verify gas line connections, test for leaks, and confirm proper venting before sign-off. Haul-away of old units is available for $99.
(855) 397-7233
